64
Playback
Cha
p
te
r 4
Recor
d
ing
, P
la
y
b
a
c
k
a
nd Cop
y
ing
• Clips and EDLs on Professional Disc or SxS memory
cards cannot be played in this mode.
• Repeat playback is disabled when menu item 158
PLAYBACK MODE FOR INTERNAL is set to
“continuous.”
Selecting a clip or an EDL
1
Press the PB1 PORT button in the basic operation
screen or video monitor screen.
2
Select the media.
To select clips/EDLs/sub clips on the internal
storage:
Press the INTERNAL button.
To select clips/EDLs/sub clips on the Professional
Disc:
Press the DISC button.
To select clips on the SxS memory card:
Press the
MEMORY button.
When two SxS memory cards are inserted
Press the MEMORY button, and select the copy
source card (A/B).
3
Press the THUMBNAIL button.
The clip list screen (details view) of the media selected
in step
2
appears.
To switch the clip list screen to the thumbnails view
Press the DISPLAY button.
To view thumbnail images of the clips in the
UserData >XDROOT or UserData >BPAV folder
on the Professional Disc
While the clip list screen (thumbnails view/details
view) is displayed, press the PAGE/HOME button or
one of the function buttons (F1 to F6) to open the Clip
F Menu, and press the FOLDER function button (F3)
to select UserData XDROOT or UserData BPAV.
4
Do one of the following to select the clip/EDL that you
want to play.
• Turn the PUSH SET knob.
• Press the arrow buttons.
5
Press the PUSH SET knob.
The selection of the target clip/EDL is confirmed.
Playback operation
This section describes the following types of playback:
Normal playback:
Playback at normal speed
Playback in jog mode:
Variable-speed playback, with the
speed determined by the speed of turning the jog dial
Playback in shuttle mode:
Variable-speed playback, with
the speed determined by the angular position of the
shuttle dial
Playback in variable-speed mode:
Variable-speed
playback, with the speed finely determined by the
angular position of the shuttle dial
Normal playback
To start playback
Select a clip or an EDL
, and then press the
PLAY button.
No analog audio signals are output when non-audio signals
are played back.
To jump to the next or previous clip, then start
playback
Use the PREV button or NEXT button.
The PREV and NEXT buttons cannot be used to move
from the currently selected clip to an EDL or move from
the currently selected EDL to a clip or to another EDL.
To stop playback
Press the STOP button.
Notes
DISPLAY button
Note
Note
PREV button
NEXT button
STOP button
PLAY button
