125
Setup Menu
Chap
te
r 7
Men
u
s
951
H CROP POSITION (UC)
a)
Adjust the H-crop (the horizontal position when cropping in the edge crop
mode) of the up-converter output when menu item 950 is set to “EDGE
CROP”.
–120 to 0 to 120
952
LETTER BOX POSITION (UC)
a)
When menu item 950 is set to “LETTER BOX”, adjust the vertical position
where the picture is cut out for up-converter output in letter box mode.
–120 to 0 to 120
953
UP CONVERTER PROCESS
a)
Select the source picture to use in converting SD to HD.
FIELD:
Use field pictures.
ADAPTIVE [ADAPT]:
Frame or field is selected automatically.
954
DETAIL GAIN (UC)
a)
Adjust the up-converter image enhancer. Adjust the sharpness of edge
enhancement.
00 (HEX) to 40 (HEX) to 7F (HEX)
955
LIMITER (UC)
a)
Adjust the up-converter image enhancer. Set the maximum detail level
added to emphasize the original signal.
00 (HEX) to 20 (HEX) to 3F (HEX)
956
CRISP THRESHOLD (UC)
a)
Adjust the up-converter image enhancer. Set the threshold amplitude for
emphasis (signals of amplitude lower than the threshold are not
emphasized).
00 (HEX) to 08 (HEX) to 0F (HEX)
957
LEVEL DEPEND THRESHOLD
(UC)
a)
Adjust the up-converter image enhancer. Set the luminance range for
edge enhancement.
00 (HEX) to 08 (HEX) to 0F (HEX)
958
H DETAIL FREQUENCY (UC)
a)
Adjust the up-converter image enhancer. Set the center frequency and
frequency properties for edge enhancement.
3.2MHz:
3.2 MHz ±1.1 MHz
4.5MHz:
4.5 MHz ±1.4 MHz
5.0MHz:
5.0 MHz ±0.7 MHz
4.0MHz:
4.0 MHz ±2.0 MHz
959
H/V RATIO (UC)
a)
Adjust the up-converter image enhancer. Set the horizontal/vertical ratio
for edge enhancement.
00 (HEX) to 03 (HEX) to 07 (HEX)
965
IMAGE ENHANCER (INPUT UP
CONVERTER)
a)
Set up the operation of the up converter image enhancer for SD input,
separately from the settings for playback (menu items 950 to 959).
Sub-item
pb:
While SD signals are input, make the behavior of the image
enhancer of the up-converter follow the settings for playback (menu
items 950 to 959). (Settings for sub-items 2 to 11 under menu item
965 become invalid.)
input:
While SD signals are input, make the behavior of the image
enhancer of the up-converter follow the settings for sub-items 2 to 11
under menu item 965 (separate settings during input of SD signals
from those during playback).
1
ENH SETTING
2
CONVERT
Select the up-converter mode.
EDGE CROP [CROP]:
Select the edge-crop mode.
LETTER BOX [L-BOX]:
Select the letter box mode.
SQUEEZE [SQUEZ]:
Select the squeeze mode.
3
H CROP P
When sub-item CONVERT is set to “CROP”, adjust the H-crop
(horizontal crop) position for up converter output in edge crop mode.
–120 to 0 to 120
4
L BOX P
When sub-item CONVERT is set to “L-BOX”, adjust the vertical location
of the position where the picture is cut out for up converter output in letter
box mode.
–120 to 0 to 120
5
CNV PROC
Select the source picture to use in converting SD to HD.
FIELD:
Use field pictures.
ADAPTIVE [ADAPT]:
Frame or field is selected automatically.
Menu items in the 900s, relating to digital process
Item number Item name
Settings
