Sony XDCAM PXW-X70 Operating Manual Download

Page: 104 / 132

104

Troubleshooting

If you run into any problems using your camcorder, follow the flow chart below.

• Power sources/LCD screen/Wireless Remote Commander···p. 104
• Memory card···p. 105
• Recording···p. 106
• Playback···p. 108
• Connecting to TV···p. 109
• Copying/Editing/Connecting to other devices···p. 109
• Connecting to a computer···p. 110

The power does not turn on or abruptly turns off.

• Attach a charged battery pack to the camcorder (p. 21).
• Use the AC Adaptor to connect the camcorder to a wall outlet (wall socket) (p. 21).

The camcorder does not operate even when the power is set to on.

• Disconnect the power source (battery or AC Adaptor), then reconnect it after about 1 minute.
• Select

(OTHERS)

INITIALIZE.

The camcorder gets warm.

• The camcorder may get warmer while you use it. This is not a malfunction.

The remaining battery indicator does not indicate the correct figure.

• Ambient temperature is too high or too low, or the battery pack has not been charged enough.

This is not a malfunction.

• Fully charge the battery again. If the problem persists, the battery may be worn-out. Replace

it with a new one (p. 21, 120).

• The indicated figure may not be correct in certain circumstances. For example, when you

open or close the LCD screen, it takes about 1 minute to display the correct remaining
battery.

Check your camcorder, referring to the items on pages 104 to 110.

Disconnect the power source, reconnect the power source after about 1 minute and turn
on your camcorder.

Select

(OTHERS)

INITIALIZE.

This operation will reset the date, time and area settings.

Consult your Sony dealer or local authorized Sony service facility.

Power sources/LCD screen/Wireless Remote Commander

Summary of Contents for XDCAM PXW-X70





































































































































Search results

Summary of Contents for XDCAM PXW-X70

Reviews:

Related manuals for XDCAM PXW-X70

Brands by name

Popular brands

Sony XDCAM PXW-X70, Operating Manual

Search results

Summary of Contents for XDCAM PXW-X70

Reviews:

Related manuals for XDCAM PXW-X70

Brands by name

Popular brands