Sony XDCAM PXW-X70 Operating Manual Download

Page: 109 / 132

109

oub

ting

“---” is displayed on the LCD screen.

• Bars will be displayed for the camera data of the movies recorded with [COLOR BAR] set to

[ON].

appears on the LCD screen.

• This appears when you play back movies recorded with 5.1ch surround sound. 5.1ch

surround sound is down-mixed to 2ch stereo and played back on your camcorder.

Neither image nor sound is played back on the TV connected with the HDMI
cable.

• Images are not output from the HDMI OUT jack, if copyright protection signals are recorded

in the images.

• Signals are not output from the HDMI OUT jack when the USB jack is connected.
• Images are not output from the HDMI OUT jack, if the [HDMI] is not selected from the

[OUTPUT SELECT] (p. 90).

Neither image nor sound is played back on the TV, projector, or AV amplifier
connected with the HDMI cable.

• If you cannot view images or hear sound on the TV, projector, or AV amplifier connected

with the HDMI cable, try disconnecting and connecting the HDMI cable, or turn on your
camcorder again.

The image appears distorted on the 4:3 TV.

• This happens when viewing a movie recorded in the 16:9 (wide) mode on a 4:3 TV. Select

(REC/OUT SET)

[VIDEO OUT]

[DOWN CONVERT TYPE]

the

appropriate down conversion type (p. 91).

Black zone appears at top and bottom of a 4:3 TV screen.

• This happens when viewing a movie recorded in the 16:9 (wide) mode on a 4:3 TV. This is

not a malfunction.

Time code and other information appear on the display of the connected
device.

• Set [DISPLAY OUTPUT] to [LCD PANEL] when you connect a device with the A/V

connecting cable (sold separately) (p. 97).

Copy cannot be done correctly using the A/V connecting cable (sold
separately).

• The A/V connecting cable (sold separately) is not connected properly. Make sure that the

A/V connecting cable (sold separately) is connected to the input jack of the device.

Connecting to TV

Copying/Editing/Connecting to other devices

Continued

Summary of Contents for XDCAM PXW-X70





































































































































Search results

Summary of Contents for XDCAM PXW-X70

Reviews:

Related manuals for XDCAM PXW-X70

Brands by name

Popular brands

Sony XDCAM PXW-X70, Operating Manual

Search results

Summary of Contents for XDCAM PXW-X70

Reviews:

Related manuals for XDCAM PXW-X70

Brands by name

Popular brands