Sony XDCAM PDW-HD1500, Installation Manual

Page: 9 / 22

1-1 (E)
PDW-HD1500 IM
1-3. Operating Conditions
1-4. Power Supply
1-6. Connectors / Cables
1-7. Signal Inputs and Outputs
1-8. Settings after Installation
Start
Determination of
installation place
Unpacking
*Connection
*Initial setup
*Operation check
End
n
When the unit is transported, it is required to pack the unit into the specified new packing materials.
Do not reuse the packing materials.
1-5. Installation Space
Installation
Section 1
Installation
1-1. Installation Procedure
Installation procedure of this unit is shown on the following flowchart.
Refer to each section about detail of each flow.
The operation manual is also reqruired to do
* -marked flow.
1-2. Supplied Accessories
Cap, BNC ........................................................................ 12
Cap, DC OUT .................................................................... 1
Cap, XLR (F) ..................................................................... 2
Cap, XLR (M) ................................................................... 4
Cap, DUST ........................................................................ 2
Operation manual (Japanese) ............................................ 1
Operation manual (English) .............................................. 1
Installation manual ............................................................ 1
CD-ROM (Operation manual) ........................................... 1
CD-ROM (XDCAM APPLICATION SOFTWARE) ....... 1
n
After installation, be sure to use the supplied cap for protecting unused connector.