manualshive.com logo in svg

Sony XAV-C1, User Manual, Page: 75 / 111

Share
Download
Sony XAV-C1 User Manual Download Page 75

Using the Smart Utilities

63

6

Release the CAPTURE button when finished.

The captured video clip appears in the video window.

To play back captured video clips

Start the Movie Player software. Click 

 to play back the images. 

Click

 to pause, 

 to stop playback.

To end Smart Capture

❑

Click the   (Close) button.

To end Movie Player

❑

Click the   (Close) button.

✍

When the lens is pointed towards you, Smart Capture is in mirror mode. In mirror mode, you 
can take a picture of yourself.  A mirror-image appears in the Smart Capture window of the 
display while you are viewing. The captured image, however, will not be reversed.

You can capture video images in the following formats:

Non-compressed : Video  160 x 120, 24 bits, maximum 10 frames/sec.

Audio  PCM, 11.025kHz, 16 bits, monaural.

Compressed : Video  VDOWave SV-512, 160 x 112, 24 bits, maximum 10 frames/sec.

Audio  GSM 6.10, 11.025kHz, monaural.

A gap may appear when an object in rapid movement is viewed. This is not a malfunction.

Captured video clip

Summary of Contents for XAV-C1
















































































































Reviews:

No comments