XAV-AX150
6
Sony CONFIDENTIAL
For Authorized Servicer
2. Setting of Destination Code
After checking the destination code,
if the correct destination code was
not displayed,
according to procedure below, be sure to set the correct
destination code.
Setting procedure:
1. Press the button on the remote commander in order of [
>
]
t
[
.
]
t
[ENTER], enter the destination code setting mode and
the left most digit of “Destination Code” change to red (cursor
for edit) and blinks.
Red blinks
CPU Version
MCU Version
DSP Version
OSD Version
Destination Code
BD ADDRESS
1242
1243
3730
1806011349
X
X X X X X
12:34:56:78:90:AB
(Displayed characters/values in the above fi gure are example)
2. Input the 6 digits destination code “00D442”.
Press the [
V
] or [
v
] button on the remote commander, and select
the alphanumeric character of “0 to F”.
Note 1:
The destination code cannot be inputted by operation of main unit.
Be sure to input the destination code by using the remote commander.
Note 2:
The number buttons on the remote commander cannot be used.
Press [
V
] or [
v
] button
to select “0 to F”.
CPU Version
MCU Version
DSP Version
OSD Version
Destination Code
BD ADDRESS
1242
1243
3730
1806011349
0
X X X X X
12:34:56:78:90:AB
(Displayed characters/values in the above fi gure are example)
The cursor advances by pressing the [ENTER] button on the
remote commander.
The position of the cursor can not be returned.
If you have advanced the digits by mistake, press the [ENTER]
button repeatedly until the cursor moves to the position you
want to modify.
(The cursor disappears when press the [ENTER] button at the
right most digit, and when press the [ENTER] button again, the
cursor appears at the left most digit)
Press [ENTER]
button, move
the cursor.
CPU Version
MCU Version
DSP Version
OSD Version
Destination Code
BD ADDRESS
1242
1243
3730
1806011349
0
X X X X X
12:34:56:78:90:AB
0
X
0
X
(Displayed characters/values in the above fi gure are example)
3. After inputting the right most (sixth) digit, set value is memo-
rized by pressing the [ENTER] button on the remote command-
er, then the cursor disappears and returns to white.
Press [ENTER]
button, cursor
disappears.
CPU Version
MCU Version
DSP Version
OSD Version
Destination Code
BD ADDRESS
1242
1243
3730
1806011349
0 0 D 4 4
2
12:34:56:78:90:AB
4
2
4 2
(Displayed characters/values in the above fi gure are example)
4. Press the [OFF] button on the remote commander, the unit auto-
matically restarts and return to the “Initial Setting” screen.
Touch the [OK], the screen changes to the “For your safety”
screen and then the home screen is displayed.
Language
Demo
Set Date
/
Time
English
ON
01/01/2018
Initial Setting
1:00 AM
OK
Do not watch and operate the unit while driving.
Follow your local traffic laws and regulations.
For your safety:
1:00 AM
Close
Touch the [OK]
Initial Setting screen
For your safety screen
CPU Version
MCU Version
DSP Version
OSD Version
Destination Code
BD ADDRESS
1242
1243
3730
1806011349
0 0 D 4 4 2
12:34:56:78:90:AB
(Displayed screen in the above fi gure are example)
5. Press the [HOME] button on the main unit.
– Lower side of front panel –
Press the [HOME] button
6. Press the [OFF] button on the remote commander to the state of
source off , enter the destination code checking mode by pressing
the buttons on the remote commander in order of the [4]
t
[5]
t
[6] (press only the [6] button for two seconds).
Tuner
AM
Source off (HOME screen)
Rear Camera
Phone
USB
BT Audio
(Displayed screen in the above fi gure are example)
7. Check the destination code of 6 digits on the screen display is a
value set in step 2.
Note 3:
If the setting is incorrect, start from step 1 again.
CPU Version
MCU Version
DSP Version
OSD Version
Destination Code
BD ADDRESS
1242
1243
3730
1806011349
0 0 D 4 4 2
12:34:56:78:90:AB
check
(Displayed characters/values in the above fi gure are example)
– Continued on next page –
SYS SET
2020/02/07 23:51:10 (GMT+09:00)
