background image

XAV-602BT

2

FLEXIBLE  CIRCUIT  BOARD  REPAIRING

•  Keep the temperature of soldering iron around 270 °C during 

repairing.

•  Do not touch the soldering iron on the same conductor of the 

circuit board (within 3 times).

•  Be careful not to apply force on the conductor when soldering 

or unsoldering.

SAFETY-RELATED  COMPONENT  WARNING!

COMPONENTS  IDENTIFIED  BY  MARK  

0

  OR  DOTTED  LINE  

WITH  MARK  

0

  ON  THE  SCHEMATIC  DIAGRAMS  AND  IN  

THE  PARTS  LIST  ARE  CRITICAL  TO  SAFE  OPERATION.
REPLACE  THESE  COMPONENTS  WITH  SONY  PARTS 

 

WHOSE  PART  NUMBERS  APPEAR  AS  SHOWN  IN  THIS  
MANUAL  OR  IN  SUPPLEMENTS  PUBLISHED  BY  SONY.

ATTENTION  AU  COMPOSANT  AYANT  RAPPORT  

À  LA  SÉCURITÉ!

LES  COMPOSANTS  IDENTIFIÉS  PAR  UNE  MARQUE  

0

  SUR  

LES  DIAGRAMMES  SCHÉMATIQUES  ET  LA  LISTE  DES  
PIÈCES  SONT  CRITIQUES  POUR  LA  SÉCURITÉ  DE  FONC-
TIONNEMENT.  NE  REMPLACER  CES  COMPOSANTS  QUE  
PAR  DES  PIÈCES  SONY  DONT  LES  NUMÉROS  SONT  DON-
NÉS  DANS  CE  MANUEL  OU  DANS  LES  SUPPLÉMENTS  
PUBLIÉS  PAR  SONY.

CAUTION

Use of controls or adjustments or performance of procedures 
other than those speci

fi

 ed herein may result in hazardous radia-

tion exposure.

NOTES  ON  CHIP  COMPONENT  REPLACEMENT

•  Never reuse a disconnected chip component.
•  Notice that the minus side of a tantalum capacitor may be dam-

aged by heat.

US and foreign patents licensed from Dolby 
Laboratories.

MPEG Layer-3 audio coding technology and patents 
licensed from Fraunhofer IIS and Thomson.

Copyrights

Manufactured under license 
from Dolby Laboratories. Dolby 
and the double-D symbol are 
trademarks of Dolby 
Laboratories.

Microsoft, Windows, Windows Vista and Windows 
Media and logos are trademarks or registered 
trademarks of Microsoft Corporation in the United 
States and/or other countries.

This product is protected by certain intellectual 
property rights of Microsoft Corporation. Use or 
distribution of such technology outside of this 
product is prohibited without a license from 
Microsoft or an authorized Microsoft subsidiary.

“DVD VIDEO,” “DVD-R,” “DVD-RW,” “DVD+R,” and 
“DVD+RW” are trademarks.

The Bluetooth® word mark and logos are owned by 
the Bluetooth SIG, Inc. and any use of such marks 
by Sony Corporation is under license. Other 
trademarks and trade names are those of their 
respective owners.

ZAPPIN is a trademark of Sony Corporation.

12 TONE ANALYSIS and its logo 
are trademarks of Sony 
Corporation.

“WALKMAN” and 
“WALKMAN” logo are 
registered trademarks of 
Sony Corporation.

SensMe and the SensMe logo are 
trademarks or registered 
trademarks of Sony Mobile 
Communications AB.

Music and video recognition technology and 
related data are provided by Gracenote

®

. Gracenote 

is the industry standard in music recognition 
technology and related content delivery. For more 
information, please visit www.gracenote.com.

CD, DVD, Blu-ray Disc, and music and video-related 
data from Gracenote, Inc., copyright © 2000 - 
present Gracenote. Gracenote Software, copyright 
© 2000 - present Gracenote.

One or more patents owned by Gracenote apply to 
this product and service. Gracenote website for a 
nonexhaustive list of applicable Gracenote patents.

Gracenote, CDDB, MusicID, MediaVOCS, the 
Gracenote logo and logotype, and the “Powered by 
Gracenote” logo are either registered trademarks or 
trademarks of Gracenote in the United States and/
or other countries.

iPhone, iPod, iPod classic, iPod nano, and iPod 
touch are trademarks of Apple Inc., registered in 
the U.S. and other countries. App Store is a service 
mark of Apple Inc.

The “AAC” logo is a trademark of Dolby 
Laboratories.

© 2013 TomTom N.V., The Netherlands. TomTom®, 
the 

®

 logo, among others, are Trademarks 

owned by TomTom N.V. or one of its subsidiaries. 
Please see www.tomtom.com/legal for the limited 
warranty and end user license agreement applying 
to this product. Ordnance Survery © Crown 
Copyright License number 100026920. Data Source 
© 2013 Tele Atlas N.V.©
© 2013 - Loquendo TTS. All rights reserved. 
Loquendo is a registered trademark. Nuance

®

 is a 

registered trademark of Nuance Communications, 
Inc. and used here under license.

MirrorLink™ and the MirrorLink Logo are 
certification marks of the Car Connectivity 
Consortium LLC. Unauthorized use is strictly 
prohibited.

THIS PRODUCT IS LICENSED UNDER THE MPEG-4 
VISUAL PATENT PORTFOLIO LICENSE FOR THE 
PERSONAL AND NON-COMMERCIAL USE OF A 
CONSUMER FOR DECODING MPEG-4 VIDEO THAT 
WAS ENCODED BY A CONSUMER ENGAGED IN A 
PERSONAL AND NON-COMMERCIAL ACTIVITY AND/
OR WAS OBTAINED FROM A VIDEO PROVIDER 
LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. 
NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR 
ANY OTHER USE. ADDITIONAL INFORMATION 
INCLUDING THAT RELATING TO PROMOTIONAL, 
INTERNAL AND COMMERCIAL USES AND LICENSING 
MAY BE OBTAINED FROM MPEG LA, LLC. SEE 
HTTP://WWW.MPEGLA.COM

THIS PRODUCT IS LICENSED UNDER THE AVC PATENT 
PORTFOLIO LICENSE FOR THE PERSONAL AND NON-
COMMERCIAL USE OF A CONSUMER TO
(i)ENCODE VIDEO IN COMPLIANCE WITH THE AVC 
STANDARD (“AVC VIDEO”)
AND/OR
(ii)DECODE AVC VIDEO THAT WAS ENCODED BY A 
CONSUMER ENGAGED IN A PERSONAL AND
NON-COMMERCIAL ACTIVITY AND/OR WAS 
OBTAINED FROM A VIDEO PROVIDER LICENSED TO 
PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR 
SHALL BE IMPLIED FOR ANY OTHER USE. 
ADDITIONAL INFORMATION MAY BE OBTAINED 
FROM MPEG LA, L.L.C. SEE 
HTTP://WWW.MPEGLA.COM

THIS PRODUCT IS LICENSED UNDER THE AVC PATENT 
PORTFOLIO LICENSE AND VC-1 PATENT PORTFOLIO 
LICENSE FOR THE PERSONAL AND NON-
COMMERCIAL USE OF A CONSUMER TO DECODE 
VIDEO IN COMPLIANCE WITH THE AVC STANDARD 
(“AVC VIDEO”) AND/OR THE VC-1 STANDARD (“VC-1 
VIDEO”) THAT WAS ENCODED BY A CONSUMER 
ENGAGED IN A PERSONAL AND NONCOMMERCIAL 
ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO 
PROVIDER LICENSED TO PROVIDE AVC VIDEO AND/
OR VC-1 VIDEO. NO LICENSE IS GRANTED OR SHALL 
BE IMPLIED FOR ANY OTHER USE. ADDITIONAL 
INFORMATION MAY BE OBTAINED FROM MPEG LA, 
L.L.C. SEE HTTP://WWW.MPEGLA.COM

Pandora, the Pandora logo, and the Pandora trade 
dress are trademarks or registered trademarks of 
Pandora Media, Inc., used with permission.

Android is a trademark of Google Inc. Use of this 
trademark is subject to Google Permissions.

BlackBerry

®

 is the property of Research In Motion 

Limited and is registered and/or used in the U.S. 
and countries around the world. Used under license 
from Research In Motion Limited.

SiriusXM Connect Vehicle Tuner and Subscription 
sold separately.
www.siriusxm.com
Sirius, XM and all related marks and logos are 
trademarks of Sirius XM Radio Inc. All rights 
reserved.
All other trademarks are trademarks of their 
respective owners.

This product uses NCM driver software which is 
licensed to Sony by MCCI corporation.

Summary of Contents for XAV-602BT









































































Reviews: