Sony WX-850BT Service Manual Download

Page: 4 / 62

WX-850BT/900BT/900BTM

REPLACING THE LITHIUM BATTERY OF THE REMOTE
COMMANDER (850BT, 900BT: US, Canadian, E, Indian,
Australian models and 900BTM only)

Under normal conditions, the battery will last
approximately 1 year. (The service life may be
shorter, depending on the conditions of use.)
When the battery becomes weak, the range of the
remote commander becomes shorter.

CAUTION

Danger of explosion if battery is incorrectly
replaced. Replaced only with the same or
equivalent type.

Notes on the lithium battery

Keep the lithium battery out of the reach of children.
Should the battery be swallowed, immediately
consult a doctor.

Wipe the battery with a dry cloth to ensure a good
contact.

Be sure to observe the correct polarity when installing
the battery.

Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.

WARNING

Battery may explode if mistreated.
Do not recharge, disassemble, or dispose of in
fire.

+ side up

MODEL IDENTIFICATION

Distinguish by Part No. on the bottom side of the main unit.

Part No.

Model Number Label

– Bottom view –
(US, Canadinan, AEP and UK models)

– Bottom view –
(E, Indian and Australian models)

Model Number Label

Part No.

Model

4-575-528-0

[]

WX-900BT: US and Canadian models (UC)

4-575-529-0

[]

WX-900BT: AEP and UK models (EUR)

4-575-530-0

[]

WX-900BT: E and Australian models (E)

4-575-531-0

[]

WX-900BT: Indian model (IN)

4-575-532-0

[]

WX-900BTM: Indian model
(MARUTI SUZUKI model) (IN)

4-588-101-0

[]

WX-850BT: US and Canadian models
(Wal-Mart model) (UC)

DESTINATION ABBREVIATIONS

The following abbreviations for model destinations are used in this
service manual.

• Abbreviations
AUS :

Australian

model

CND : Canadian model
IND

: Indian model

Ver. 1.1

Summary of Contents for WX-850BT































































Search results

Summary of Contents for WX-850BT

Reviews:

Related manuals for WX-850BT

Brands by name

Popular brands

Sony WX-850BT, Service Manual

Search results

Summary of Contents for WX-850BT

Reviews:

Related manuals for WX-850BT

Brands by name

Popular brands