Sony WRT-847B, Operating Instructions Manual

Page: 8 / 76

2
(GB)
Introduction
Coupling with the CU-F780, CU-G780, CU-E700, CU-E672
or CU-F117 Sony Microphone Capsule Unit, the WRT-847A/
847B UHF-synthesized transmitter unit makes up a UHF-
synthesized wireless microphone to be used in a UHF-
synthesized wireless microphone system.
For vocal concentration, operate the WRT-847A/847B in
conjunction with the WRR-802A/850A, MB-806A with
WRU-806A UHF Synthesized Tuner. For vocal and
interview use, operate the WRT-847A/847B in conjunction
with the WRR-805A/855A UHF Synthesized Tuner.
The microphone/transmitter and tuners of the wireless
microphone system are classified by frequency band.
A 24 MHz frequency band (a 14 MHz frequency band:
model available in Australia) is assigned to each
microphone/transmitter and tuner model.
In building up a UHF wireless microphone system, be sure
to combine a microphone/transmitter and a tuner having the
same TV channel number.
Features
Selectable microphone capsules
To make up suitable wireless microphones for your use, five
microphone capsule units are available as optional
accessories. The capsule units for the WRT-847A/847B are;
CU-F780 Super Cardioid Dynamic Microphone Unit
CU-G780 Super Cardioid Dynamic Microphone Unit
for Live Vocal Performance
CU-E700 Super Cardioid Electret Condenser
Microphone Unit
CU-E672 Hyper Cardioid Electret Condenser
Microphone Unit (Short-shotgun)
CU-F117 Omni-directional Dynamic Microphone Unit
The capsule unit can be mounted simply by screwing it into
the transmitter.
Phase Locked Loop (PLL) synthesized system
The WRT-847A/847B features a refined phase locked loop
(PLL) synthesizer circuit.
Wide dynamic range and low noise
The compander (compressor/expander) system enables
transmission over a wide dynamic range with minimum
noise. The compander time constant is selectable to get the
optimum sound quality of the individual microphone
capsule.