48
|
Note
• Certain countries may regulate
disposal of battery used to power
this product. Please consult your
local authority.
When to replace/charge
the battery
The battery remainder mark has 3
steps to show the remaining
battery power.
Display
Condition
Remote
Main
control
unit
There is enough
battery power.
The battery
power is
decreasing.
The battery is
exhausted.
Replace it with a
new battery.
When the battery is exhausted,
tape playback will become
unstable and noisy, and then the
tape will stop.
Replace or charge the battery when
“
n
” flashes in the display.
Notes
• When you insert a charged battery,
the battery remainder mark may
show “
” ( “
” on the main
unit) even if it is not fully charged.
• The battery remainder mark may
temporarily show a lower level
during fast forwarding or
rewinding or use in extremely low
temperatures.
English
z
Getting Started
Choosing a Power
Source
Dry Battery
Attach the supplied battery case,
and then insert one R6 (size AA)
battery with correct polarity.
Be sure to insert it from the
}
side.
Note
• For maximum performance we
recommend that you use a Sony
alkaline battery.
Rechargeable Battery
1
Insert the supplied
rechargeable battery (NC-
6WM) into the charger with
correct polarity.
2
Plug in the charger to the
house current (mains).
Japanese model:
Full
charging takes about 2 hours.
“Sony World Model”:
Full
charging takes about 1 hour.
If the plug does not fit to your
mains, attach the supplied AC
plug adaptor.
3
Insert the fully charged battery
into the rechargeable battery
compartment.
You can charge the battery about
300 times.
µ
µ
µ
µ
