Sony WEGA KV-32HQ150K, Operating Instructions Manual

Page: 71 / 148

Additional information
21
Teaching the remote control*
To reduce the number of remote controls you need, this remote control has a
learning feature. Once set up as explained below, it can be used in place of your
other remote controls.
Erasing the last learned function
Erasing all the learned functions
1.
Press and hold the
.
button for approximately six seconds, until the
‘AUX’ light flashes.
2. Press the button on which you wish to store a learned function. The VCR,
TV, DVD and AUX lights flash in order.
The following buttons can be used to store learned
functions:
VIDEO I/ 1 button Numbered buttons
V , v , B , b buttons OK button
Coloured buttons Menu button
Prog+/- buttons
3.
Position the other remote control as shown. Press the button that you
wish to teach your TV remote control. The VCR, TV, DVD and AUX lights
illuminate at the same time when a function has been learned and stored.
4. Repeat steps 2 and 3 to learn other functions.
5. Press the
.
button to finish.
1.
Press and hold the
.
button for approximately six seconds, until the
‘AUX’ light flashes.
2. Press the % button to erase the last learned function.
3. Press the
.
button to return to normal operation.
1.
Press and hold the
.
button for approximately six seconds, until the
‘AUX’ light flashes.
2. Press the % and
.
buttons to erase all learned functions.
3. Press the
.
button to return to normal operation.
*The functions learned may be lost if weak
batteries are not replaced immediately.
TV remote control
Other remote control
2-4cm
GBpages18-24.fm Page 21 Monday, January 10, 2005 5:45 PM