19
GB
RM-945
PROG
1
2
3
4
5
6
7
8
9
0
Navegador
Configuración del Sistema
Aceptar
Versión
PROG+ PROG
Select:
Select:
Move Frame
03
Switching PAP on and off
1
Press
to display PAP.
One of the screens will be framed to indicate that this is
the active screen. It means that when you want to select
the PAP source, you will be doing it in the active screen.
2
Press
again to remove PAP.
On the screen a banner appears guiding you on how to operate
PAP. This banner will disappear after some seconds but it can
always be displayed again by pressing the
button.
Changing the active screen
This is only possible if the Media Selector is set to TV.
To change the active screen (framed), press the
B
or
b
buttons.
Selecting PAP source
1
Selecting a TV channel:
Press the
B
button to select the left screen as the active screen. Next press the number buttons
or
PROG +/-
to select a TV channel.
Video input signals can not be displayed on the left screen.
2
Selecting an input source:
Press the
b
button to select the right screen as the active screen. Next press repeatedly the
button to show the input signal of the connected equipment on right screen of the TV. For more
details on which input symbol you wish to choose, please see section "Viewing pictures from
equipment connected to the TV" on page 23.
RF signal (TV broadcast channels) can not be displayed on the right screen.
Selecting the sound
The sound of the active screen (framed) always comes from the TV speakers.
Besides that, you can listen to the active screen as well as the non active screen via headphones.
To do this:
With the PAP switched on, refer to the section "The Sound Adjustment Menu", select "Headphones
Set Up" and set the option "
PAP Sound" according your preference. For details see page 13.
In PAP (picture and picture) mode, the output from the Scart
2/
2
is fixed to the right
picture.
TV Functions
PAP (PICTURE AND PICTURE)
PAP divides the screen into two to watch two pictures in format 4:3 simultaneously.
01GBKV29FQ86U.fm Page 19 Monday, February 16, 2004 12:32 PM