Sony WEGA KV-27FS100L, Service Manual

Page: 99 / 200

Using the Menus
35
Using the Timer Menu
Current Time
Set your TV to the current day and time. Press to open the Current Time
menu:
1
Use the F or f buttons to enter the correct day and time, then press .
2
Press to exit the menu.
Timer 1 and
Timer 2
Scheduled
viewing
Use the timers to program your TV to turn on and off by day, time, duration, and
channel. The timer duration is a maximum of six hours. When the channel is
fixed, it is not necessary to set the channel.
1
Use the F or f buttons to highlight
Timer 1
or
Timer 2
, then press .
2
Use the F or f buttons to enter the desired day, start time, duration, and
channel, then press . The timer status should be On when the Timer
has been set, and the timer light on the front panel of the TV should be on.
3
Press to exit the menu.
✍
When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of
any loss of power, Current Time, Timer 1, and Timer 2 settings will be cleared.
To access the Timer menu, use the following steps:
To Display To Highlight To Select
Timer
Move Select End
Current Time
Timer 1 : Set
Timer 2 : Set
✍
You must set the Current Time before you can use Timer 1 or Timer 2.
✍
Select Off to turn off the Timer. Your previous settings will be saved.
01US01COV-BR2.book Page 35 Tuesday, May 20, 2003 3:37 PM