61
|
Area indication and
frequency range
Area*
Frequency range
FM (MHz) AM (kHz)
USA
87.5–108
530–1,710
Eur
87.5–108
531–1,602
Japan
76–90
531–1,710
(AREA 1-8, JR)
*USA : USA, Canada, and Central
and South America
Eur : European and other
countries
To receive stations in Japan
Select “AREA 1 to 8” or “JR” in
step 4 above.
Using the Menu
Adjusting playback
modes
You can adjust the following
playback modes using the Menu
function on the remote control or
on the main unit.
AVLS: Turn on to limit the
maximum volume to protect
your hearing (Automatic
Volume Limiter System)
(on the main unit, “
”
indicates “on”).
a
(PB MODE): Turn on to play
both sides repeatedly (on the
main unit, “
a
” indicates
“on”).
Plays both sides once from the
FWD side when turned off (on
the main unit, “
Å
” indicates
“off”).
a
(PB
a
NR): Turn on when you
play back a tape recorded with
the Dolby* B NR system (on the
main unit, “
” indicates
“on”).
* Dolby noise reduction
manufactured under license from
Dolby Laboratories Licensing
Corporation.
“DOLBY”and the double-D symbol
a
are trademarks of Dolby
Laboratories Licensing
Corporation.
Notes
• The playback modes can be set or
canceled separately.
• The playback modes cannot be
adjusted while recording.
On the remote control
1
Press MENU to enter the
menu mode. “
r
” (the cursor)
will flash in the display of the
remote control.
2
Jog the jog lever upward/
downward repeatedly until
“
r
” flashes on the playback
mode to be adjusted.
3
Press the jog lever to enter.
You will hear a short beep and
“
r
” will appear for a few
seconds. Then, the display will
exit the menu mode.
