![background image](http://html.mh-extra.com/html/sony/vpl-vw350es/vpl-vw350es_operating-instructions-manual_415850025.webp)
25
Picture Menu
U
s
ing t
h
e
M
e
n
u
s
MPEG NR
(MPEG Noise
Reduction)
Reduces block noise and mosquito noise, in particular in digital signals.
Auto:
Detects the noise level to reduce the block noise and mosquito
noise of the picture automatically.
High/Middle/Low:
Select a setting according to the block noise and
mosquito noise of the input signal source.
Off:
The MPEG NR (MPEG noise reduction) function is not applied.
Tip
The noise level may not be detected accurately with “Auto” depending
on the input signal source. If the picture is unacceptable with “Auto,”
select a setting from among “High,” “Middle,” “Low” or “Off.”
Smooth Gradation
Smooths the gradation of the flat parts of images.
High/Middle/Low:
You can adjust the smooth gradation effect.
Off:
The smooth gradation function is not applied.
Film Mode
According to the film source you have selected, make a setting for
playback.
Auto:
Suitable for reproducing the original picture movement.
Normally, set this to “Auto.”
Off:
Plays back the picture in progressive format without detecting
video signals automatically.
Gamma
Correction
[GAMMA
CORRECTION]
Adjusts the response characteristics of the tone of the picture.
Select a favorite tone from 10 options.
1.8:
Bright
Produces a brighter picture overall.
2.0
2.1
2.2
2.4
2.6:
Dark
Produces a darker picture overall.
Gamma 7:
Produces a sharper picture by emphasizing darker parts.
Gamma 8:
Produces a brighter picture than Gamma 7. Select this when
you watch in a bright environment, such as a living room.
Gamma 9:
Produces a brighter picture than Gamma 8.
Gamma 10:
Increases the sharpness in images. Select this when you
watch TV programs, etc., in a bright environment, such as a living room.
Off:
The “Gamma Correction” function is not applied.
Color Correction
[COLOR
CORRECTION]
On:
Adjusts Hue, Saturation or Brightness of the selected colors.
Repeat steps
1
and
2
described below to specify the target color.
1
Press
M
/
m
to select “Color Select,” then press
<
/
,
to select the
color you want to adjust among “Red,” “Yellow,” “Green,” “Cyan,”
“Blue” and “Magenta.”
2
Press
M
/
m
to select “Hue,” “Saturation” or “Brightness,” then adjust
them to suit your taste using
<
/
,
while watching the projected
picture.
Off:
The “Color Correction” effect is not applied.
Clear White
Emphasizes vivid whites.
High/Low:
You can adjust the “Clear White” effect.
Off:
The “Clear White” effect is not applied.
Setting items
Description