Sony VPL-VW295ES Quick Reference Manual Download Page 92

Page: 92 / 94

3D Features

3D capability

Active

Simulated 3D

Yes

Display

Display Technology

Display Device: SXRD 0.74" x3

Screen Size

Projection image size: 60"-300

Display Resolution

4096 x 2160
Display Performance (Display resolution): Up to

4096/60p

Display Features

Light source

Power: 225W
Type: UHP
Life: 6,000 h

TRILUMINOS Display

Yes

General Features

Blanking

Yes

Inputs and Outputs

Enjoy all types of content in 4K HDR.

Bring ultra high-definition to everything. The VPL-VW295ES can project content at up to 60 frames per second (fps) in 4K

for even smoother images with superior color and realism. Both 18 Gbps HDMI inputs support HDCP 2.2 so you can enjoy

more of the latest 4K content services and full resolution gaming.

Input lag reduction for gamers.

Reduced input lag creates a better response time between control input and on-screen action, making video games

perform better than ever before. Immerse yourself in your favorite games and beat your opponent to the punch.

Anamorphic lens compatibility for 4K signals (V-stretch for 4K)

Wide lens compatibility means that you can use your legacy anamorphic lenses with ease, even with 4K content. Watch

your content in your favorite formats.

Watch for longer with a 225 W high-pressure lamp.

Enjoy up to 6000 hours of watch time (in low mode) from a long-lasting mercury lamp. This means fewer lamp swaps,

simpler maintenance, and lower running costs.

Flexible home installation with wide zoom and shift lens

The powered zoom lens with a 2.1x zoom ratio and wide lens shift range gives greater installation flexibility in any room size,

even with a high ceiling.

Built-in 3D transmitter synchronizes entertainment

A built-in 3D transmitter synchronizes the optional glasses with the projector, so you can start watching 3D movies quicker.3

Upscale 2D films to 3D and enjoy classic movies in a whole new dimension or watch anamorphic images and 3D films

simultaneously without changing the lens. High-emission power gives you a strong signal anywhere in the room.

Front-facing fan

With the fan exhaust positioned at the front of the projector, you don’t need to worry about wall clearance and room for

air intake/exhaust when installing. This helps maximize throw distance, for the biggest possible projected images.

Specifications

Summary of Contents for VPL-VW295ES































































































Search results

Summary of Contents for VPL-VW295ES

Reviews:

Related manuals for VPL-VW295ES

Brands by name

Popular brands

Sony VPL-VW295ES, Quick Reference Manual

Search results

Summary of Contents for VPL-VW295ES

Reviews:

Related manuals for VPL-VW295ES

Brands by name

Popular brands