Sony VPL-V W100, Operating Instructions Manual

Page: 21 / 259

21
GB
Step 2: Connecting the Projector
C
o
n
nec
tio
n
s an
d Pr
epa
ra
tio
n
s
Tip
Set “Input-A Signal Sel.” or “DVI Signal Sel.” in the Setup menu to “Auto” or
“Computer.” If the input signal does not appear properly, set it to “Computer.” ( 1 page
53)
If you set your computer, such as a notebook type, to output the signal to both your
computer’s display and an external monitor, the picture of the external monitor may not
appear properly. Set your computer to output the signal to only the external monitor.
For details, refer to the computer’s operating instructions supplied with your computer.
Connecting to a Computer
Note
HD D-sub 15-pin cable (not supplied),
or DVI - DVI cable (not supplied)
: Video signal flow
Right side of the projector
to monitor output
Computer