21
(GB)
The INPUT SETTING
Menu
The INPUT SETTING menu is used to adjust the
input signal.
Unadjustable items depending on the input signal are
not displayed in the menu.
Operation
1. Select an item
Use the
M
or
m
key to select the item, then press the
,
or ENTER key.
2. Adjust an item
• When changing the adjustment level:
To increase the number, press the
M
or
,
key.
To decrease the number, press the
m
or
<
key.
Press the ENTER key to restore the original screen.
• When changing the setting:
Press the
M
or
m
key to change the setting.
Press the ENTER or
<
key to restore the original
screen.
DOT PHASE
Adjusts the dot phase of the LCD panel and the signal
input from the INPUT A connector. Adjust the picture
further for finer picture after the picture is adjusted
with pressing the APA key.
Adjust the picture to where it looks clearest.
When the video signal is input
When the RGB signal is input
Memory No.
Signal type
Memory No.
Signal type
SIZE
Adjusts the horizontal size of picture input from the
INPUT A connector.
The higher the setting, the larger the horizontal size of
the picture.
The lower the setting, the smaller the horizontal size
of the picture. Adjust the setting according to the dots
of the input signal. For details on the suitable value
for the preset signals, see page 22 (GB).
SHIFT
Adjusts the position of the picture input from the
INPUT A connector.
H adjusts the horizontal position of the picture.
V adjusts the vertical position of the picture.
As the setting for H increases, the picture moves to
the right, and as the setting decreases, the picture
moves to the left.
As the setting for V increases, the picture moves up,
and as the setting decreases, the picture moves down.
Use the
<
or the
,
key to adjust the horizontal
position and the
M
and
m
key for the vertical position.
ASPECT
Sets the aspect ratio of the picture.
When inputting 16:9 (squeezed) signal from
equipment such as a DVD player, set to 16:9.
4:3: When the picture with ratio 4:3 is input.
16:9: When the picture with ratio 16:9 (squeezed) is
input.
SCAN CONV (Scan converter)
Converts the signal to display the picture according to
the screen size.
ON: Displays the picture according to the screen
size. The picture will lose some clarity.
OFF: Displays the picture while matching one pixel
of input picture element to that of the LCD. The
picture will be clear but the picture size will be
smaller.
Note
When the XGA or SXGA signal is input, this item
will not be displayed.
V I D E O
I N P U T
S E T T I N G
A S P E C T : 4 : 3
N o . 0 1
V I D E O / 6 0
I N P U T – A
I N P U T
S E T T I N G
D O T P H A S E : 5
S I Z E
H : 1 3 4 4
S H I F T H : 2 1 9
V :
1 7
N o . 2 3
1 0 2 4 X 7 6 8
The INPUT SETTING Menu
(Continued)
