Sony VPL-FHZ700, Operating Instructions Manual

Page: 40 / 63

40
Messages List
Messages List
When any of the messages listed below appears on the projected image, address the problem in
accordance with the table below.
Message Meaning/Remedy Page
Clean the filter.
Projector temperature is
high. The light will turn
off in 1 minute. Check the items below.
• Check to see if nothing is blocking the ventilation holes.
• Check to see if the air filter is not clogged.
• Check if “Installation Attitude” on the Installation menu is
correctly selected.
3, 33,
43
Frequency is out of
range! Change the output setting of the connected equipment to one
for signals supported by the projector. 51
Please check Input-A
Signal Sel. Set “Input-A Signal Sel.” to “Auto” or select the input signal
type to suit to the input signal. 29
Clean the filter.
Projector temperature is
high.
Switching to High
Altitude Mode. At an altitude of 1,500 m or higher, if you are not using the
projector, check the items below.
• Check that nothing is blocking the ventilation holes.
• Check that the air filter is not clogged.
• Check if “Installation Attitude” on the Installation menu is
correctly selected.
3, 33,
43
Not applicable! Invalid key pressed. 5
The panel keys are
locked! “Panel Key Lock” is set to “On.” 28
Lens Control is locked! “Lens Control” is set to “Off.” 28
Function is locked! The function is locked by external control. 5, 16,
17,
18,
32, 32
Projector will shutdown
soon.
Press
?
/
1
Key to
Restart.
The
?
/
1
key was pressed and the projector will be shut down
soon. To cancel shutdown, press the ? / 1 key again (the
projector will remain on). To turn off the projector directly,
press and hold the
? / 1 key.
20
Light Dimming Reduces light output when “With Static Signal” is set. When
any change in signal is detected, or an operation (remote
control or control panel) is performed, normal brightness is
restored. 30
Constant Brightness
cannot be maintained. Although “Constant Brightness” is selected, the brightness that
is set cannot be maintained due to the lifetime of the light
source. Consult with qualified Sony personnel. 29