45
You can configure the network settings for
the projector in “Network Setting” of the
Connection/Power menu. Also, you can set
the network function on the Setup page.
Entered values on the Setup page will not be
applied unless you click on [Apply].
1
Click on [Network] to display the
Network page.
2
Set the items for Internet protocol.
(a) IPv4/IPv6 address
Obtain an IP address automatically
(DHCP):
Automatically provides the
IP Address provided by a DHCP
server.
Specify an IP address:
Set the network
manually.
-IP Address:
Input the IP address of the
projector.
-Prefix:
For IPv6, input the prefix (bit)
of the projector.
-Subnet Mask:
Input the subnet mask of
the projector.
-Default Gateway:
Input the default
gateway of the projector.
(b) DNS server
Auto:
Automatically provides the IP
Address provided by a DHCP server.
Manual
-Primary DNS:
Input the primary DNS
server of the projector.
-Secondary DNS:
Input the secondary
DNS server of the projector.
3
Set the items for Ethernet.
MAC Address:
Displays the MAC
address of the projector.
Configure the Network
Settings
Network button
LAN Network
setting area
