2-1 (E)
VPL-EX100
Section 2
Adjustments
2-1. Service
Know-How
2-1-1. When the S Prism Block Assembly is Replaced
1. Perform the V COM adjustment. (Refer to Section 2-3-3.)
2. Write the main board data supplied with the S prism block assembly.
(Refer to Section 2-5-5.)
2-1-2. When Replacing the Main Board
1. Save the main board data before replacement. (Refer to Section 2-5-2.)
2. Replace the main board. (Refer to Section 1-3-3.)
3. Write the main board data saved in step 1 to replaced main board. (Refer to Section 2-5-5.)
4. Perform the V COM adjustment. (Refer to Section 2-3-3.)
5. Perform the angle detect sensor adjustment. (Refer to Section 2-3-4.)
n
If any board other than the main board is replaced, there is not adjustment item.
