background image

15

Setting/Operating the Projector from the Computer (via Web)

Projector setting

Click [Projector Setting].

Projector Name:

 enter a projector name.

Simple Mode:

 set [On] or [Off].

When [Off] is selected, set the 
following.

Setting:

 select [Ad-hoc (peer-to-peer)] or 

[Wireless Access Point].

Network Name (SSID):

 enter the same 

network name as that of the connected 
computer.  A maximum of 32 
characters/numbers can be entered.

Network Channel:

 when [Ad-hoc (peer-

to-peer)] is selected in [Setting], you can 
select from 1 to 11.
When [Wireless Access Point] is 
selected in [Setting], [Auto] is selected.

• If the USB wireless LAN module is 

connected to the computer, remove it before 
setting.

• You may not be able to use some channel 

according to the country.

Data Encryption (WEP):

 select the data 

encryption system.
You can select from among [Off], [64 
(40) bit ASCII], [128  (104) bit ASCII], 

[64 (40) bit HEX], [128 (104) bit HEX].  
When [Off] is selected, [Key] does not 
function.

Key:

 when [Data Encryption (WEP)] is 

used, enter the key.  Enter the same key 
as that of the computer.
The number of the characters/figures is 
due to the setting of the [Data 
Encryption (WEP)].

• 64 (40) bit ASCII:  max. five characters/

numbers/symbols

• 128 (104) bit ASCII:  max. 13 characters/

numbers/symbols

• 64 (40) bit HEX:  max. ten numbers from 0 

to 9/characters from a to f

• 128 (104) bit HEX:  max. 26 numbers from 0 

to 9/characters from a to f

When [64 (40) bit ASCII] or [128 (104) bit 
ASCII] is selected, the capital and small letters 
are discriminated.

IP Address setting:

 normally select 

[Auto (DHCP)].
When [Manual] is selected, set [IP 
Address], [Subnet Mask] and [Default 
Gateway].

A DHCP server is needed to make DHCP 
valid.

User Memory:

 select from [User 1] to 

[User 5].

Edit:

 click when you want to enter a new 

user name.  The [User Name], [Setting] 
and [Cancel] button function.

User Name:

 enter the user name.

Set to List:

 click to register the added user 

name.

Cancel:

 click to cancel the user name.

Notes

Note

Note

Summary of Contents for VPL-CX85






















Reviews: