11
When Simple Mode is not Used
Address], [Subnet Mask] and [Default
Gateway].
A DHCP server is needed to make DHCP
valid.
IP Address:
select the IP address setting
from among 0 to 255.
Subnet Mask:
select the subnet mask
setting from among 0 to 255.
Default Gateway:
select the default
gateway setting from among 0 to 255.
MAC Address:
the MAC address of the
attached wireless module is displayed.
You can set the projector by using the
browser. See “Projector setting” on page
15 (“Setting/Operating the Projector from
the Computer (via Web)”).
To save the setting
Select the [Ok] button and press the ENTER
key. The settings are saved and the home
display appears.
To clear the setting menu without
saving the setting
Select the [Cancel] button and press the
ENTER key.
Setting the computer
1
Right-click the [
] icon in the task
bar and select [Open].
The main window of Projector Station
for Air Shot opens.
2
Click the [
] button of the main
window to open the [Option] dialog
box.
The [Option] dialog box is opened when
the computer is not connected to the
projector.
For details of the [Option] dialog box,
see the help manual.
3
Select [Off] in [Simple Mode].
4
Close the main window.
5
When the supplied USB wireless LAN
module is used, set the wireless LAN
referring to the User’s Guide of the
USB wireless LAN module.
When a device other than the supplied
USB wireless LAN module is used,
set the wireless setting of the
computer so that the projector and
computer can be connected.
Close the main window for setting.
Note
Note
Summary of Contents for VPL-CX85
Page 21: ...Sony Corporation ...
