Sony VPCYB3Q1R/B Page 96 User Manual Download

Page: 96 / 142

Precautions >
Using the Battery Pack

Using the Battery Pack

❑

Battery life is shorter in a cold environment. This is due to decreased battery efficiency at low temperatures.

❑

Charge battery packs at temperatures between 10°C to 30°C. Lower temperatures require longer charging time.

❑

Do not charge the battery pack in any way other than as described in this user guide or as designated by Sony in writing.

❑

While the battery pack is in use or being charged, heat builds up in the battery pack. This is normal and is not cause for
concern.

❑

You do not need to discharge the battery pack before recharging.

❑

If the battery pack quickly runs out of power after being fully charged, it may be reaching the end of its life and should be
replaced.

Summary of Contents for VPCYB3Q1R/B















































































































































Search results

Summary of Contents for VPCYB3Q1R/B

Reviews:

Related manuals for VPCYB3Q1R/B

Brands by name

Popular brands

Sony VPCYB3Q1R/B, User Manual

Search results

Summary of Contents for VPCYB3Q1R/B

Reviews:

Related manuals for VPCYB3Q1R/B

Brands by name

Popular brands