Sony VGN-TT1 User Manual Download Page 94

Page: 94 / 227

Using Peripheral Devices

Connecting a Computer Display

You can connect a computer display (monitor) either directly to your computer or via the optional docking station.

To connect a computer display

The monitor port on your computer is not accessible when the computer is attached to the docking station. Use the

MONITOR

port on the docking

station for connecting a computer display.

If necessary, plug one end of the display's power cord (1) into your display, and the other end into an AC outlet.

If you want to connect an analog monitor, plug the display cable (2) (not supplied) into the monitor port (3)

on the

computer or on the docking station.

If you want to connect a TFT/DVI monitor, plug the display cable (2) (not supplied) to an HDMI to DVI-D adapter (3) (not
supplied) and plug one end of the HDMI cable (4) (not supplied) to the HDMI to DVI-D adapter (3) and the other end to
the

HDMI

port (5) on the computer, or plug the display cable(2) (not supplied) into the

DVI-D

port on the docking station.

Summary of Contents for VGN-TT1




































































































































































































































Search results

Summary of Contents for VGN-TT1

Reviews:

Related manuals for VGN-TT1

Brands by name

Popular brands

Sony VGN-TT1, User Manual

Search results

Summary of Contents for VGN-TT1

Reviews:

Related manuals for VGN-TT1

Brands by name

Popular brands