Sony VGN-FS115B User Manual Download Page 23

Page: 23 / 140

Using your VAIO computer

Using the keyboard

Your keyboard is very similar to a desktop computer's, but has additional keys that perform model-specific tasks.

For more information on the standard keys, see Windows Help and Support Center.

The VAIO-Link website (

www.vaio-link.com

) also contains glossary information to help you use the keyboard.

Combinations and functions with the <Fn> key

Combinations/Feature

Functions

<Fn> +

(F2): speaker switch

Turns on and off the built-in speakers and the headphones.

<Fn> +

(F3/F4): speaker volume

Adjusts the built-in speaker volume.
To increase volume, press <Fn>+<F4> and then

, or keep pressing <Fn>+<F4>.

To decrease volume, press <Fn>+<F3> and then

, or keep pressing <Fn>+<F3>.

<Fn> +

(F5/F6): brightness control

Adjusts the brightness of the LCD.
To increase lightness intensity, press <Fn>+<F6> and then

, or keep pressing <Fn>+<F6>.

To decrease lightness intensity, press <Fn>+<F5> and then

, or keep pressing <Fn>+<F5>.

<Fn> +

(F7): switch to the external display

Toggles between the LCD, external device (e.g. monitor) and both LCD and external device.

Summary of Contents for VGN-FS115B













































































































































Search results

Summary of Contents for VGN-FS115B

Reviews:

Related manuals for VGN-FS115B

Brands by name

Popular brands

Sony VGN-FS115B, User Manual

Search results

Summary of Contents for VGN-FS115B

Reviews:

Related manuals for VGN-FS115B

Brands by name

Popular brands