manualshive.com logo in svg

Sony VAIO VGX-XL1 Series, User Manual, Page: 109 / 175

Share
Download
Sony VAIO VGX-XL1 Series User Manual Download Page 109

106

VGX-XL1 Digital Living System

Using an Analog Device for Video Playback

You can stream video content from an analog device, such as a VCR, using 
the VAIO Media TV server software, and watch video playback on your 
computer or across the network.

To set up an analog device

  1

Connect one end of the A/V cable to the Video Out port on your analog 
device.

  2

Connect the other end of the A/V cable to the Composite Video In jacks, 
located on the front or back of your computer equipped with Media Center.

  3

Begin playback using the analog device.

  4

On your computer, click 

Start

 on the Windows task bar and point to 

All 

Programs

, 

VAIO Media

, and then click 

VAIO Media

.

  5

Click TV. One of the following windows appears:

•

If there are other TV servers that can stream analog input on your network, 
VAIO Media™ software displays them on the server list. Click to select the 
computer equipped with Media Center from the server list.

App B VAIO Media Software.fm  Page 106  Thursday, November 10, 2005  12:20 PM

Summary of Contents for VAIO VGX-XL1 Series
















































































































































































Reviews:

No comments