Sony VAIO VGN-TT Series User Manual Download Page 101

Page: 101 / 224

101

Using Peripheral Devices

Connecting a TV

You can connect a TV with an HDMI input to your computer.

To connect a TV to your computer

To hear sound from the device connected to the

HDMI

output port, you need to change the device for sound output. For the detailed instructions, see

How do I change the sound output device?

(page 215)

Plug the power cord of your TV (1) into an AC outlet.

Plug one end of an HDMI cable (2) (not supplied) to the

HDMI

output port (3) on the computer and the other end to the TV.

Switch the input channel of the TV to external input.

Set up the TV configuration system.

If a device driver other than the one provided by Sony is used, the image will not be displayed and the audio will not be heard. Always use the device
driver provided by Sony for updates.

Summary of Contents for VAIO VGN-TT Series

































































































































































































































Search results

Summary of Contents for VAIO VGN-TT Series

Reviews:

Related manuals for VAIO VGN-TT Series

Brands by name

Popular brands

Sony VAIO VGN-TT Series, User Manual

Search results

Summary of Contents for VAIO VGN-TT Series

Reviews:

Related manuals for VAIO VGN-TT Series

Brands by name

Popular brands