Sony VAIO VGN-S450FP User Manual Download

Page: 110 / 200

110

Customizing Your VAIO Computer

Using Standby Mode

Standby mode turns off the LCD screen and sets the hard disk and the CPU to a low power consumption mode. The umber power
light flashes in this mode.

To activate Standby mode

Click Start and then Turn Off Computer.

Click Stand By.

To return to Normal mode

Press any key.

✍

If you press the power button for more than four seconds, the computer will switch off automatically. You will lose any unsaved data.

When the computer is in Standby mode, you cannot insert a disc.

The computer comes out of Standby mode quicker than out of Hibernate mode.

Standby mode uses more power than Hibernate mode.

If the battery runs down when your computer enters Standby mode, you will lose any unsaved data. Going back to the previous work state is impossible.
To avoid loss of data, you should save your data frequently.

If the computer is not used for 25 minutes, it will enter Standby mode. To avoid this, you can change the Standby mode settings.

Summary of Contents for VAIO VGN-S450FP









































































































































































































Search results

Summary of Contents for VAIO VGN-S450FP

Reviews:

Related manuals for VAIO VGN-S450FP

Brands by name

Popular brands

Sony VAIO VGN-S450FP, User Manual

Search results

Summary of Contents for VAIO VGN-S450FP

Reviews:

Related manuals for VAIO VGN-S450FP

Brands by name

Popular brands