Sony VAIO VGN-FS415M User Manual Download

Page: 77 / 169

Using Peripheral Devices

Disconnecting a USB floppy disk drive

You can disconnect a USB floppy disk drive when the computer is on or off. Disconnecting the drive when the computer is in a
power saving mode (Standby or Hibernate) may cause the computer to malfunction.

If your computer is off, you can unplug the USB cable directly from the computer.

To disconnect a USB floppy disk drive

Close all programs accessing the floppy disk drive.

Double-click the Safely Remove Hardware icon on the taskbar.
The Safely Remove Hardware window appears.

Select the floppy disk drive you want to unplug.

Click Stop.
The Stop a Hardware device window appears.

Make sure the floppy disk drive is selected, and click OK. A message appears stating it is now safe to remove the hardware
device.

Remove the floppy disk drive from the computer.

Summary of Contents for VAIO VGN-FS415M










































































































































































Search results

Summary of Contents for VAIO VGN-FS415M

Reviews:

Related manuals for VAIO VGN-FS415M

Brands by name

Popular brands

Sony VAIO VGN-FS415M, User Manual

Search results

Summary of Contents for VAIO VGN-FS415M

Reviews:

Related manuals for VAIO VGN-FS415M

Brands by name

Popular brands