Sony VAIO VGN-FS415M User Manual Download

Page: 15 / 169

Getting Started

Connecting a Power Source

You can use either an AC adapter or a rechargeable battery pack as a power source.

Using the AC Adapter

To use the AC adapter

Plug one end of the power cord (1) into the AC adapter.

Plug the other end of the power cord into an AC outlet (2).

Plug the cable attached to the AC adapter (3) into the DC In port (4) on the computer.

The shape of the DC In plug varies depending on the AC adapter.

✍

Use your computer only with the supplied AC adapter.

To disconnect your computer completely from AC power, unplug the AC adapter.

Make sure that the AC outlet is easily accessible.

If you do not use the AC adapter for a long period of time, put your computer into Hibernate mode. See Using Hibernate Mode

(page 92)

. This power saving

mode saves you the time of shutting down in the normal way.

Summary of Contents for VAIO VGN-FS415M










































































































































































Search results

Summary of Contents for VAIO VGN-FS415M

Reviews:

Related manuals for VAIO VGN-FS415M

Brands by name

Popular brands

Sony VAIO VGN-FS415M, User Manual

Search results

Summary of Contents for VAIO VGN-FS415M

Reviews:

Related manuals for VAIO VGN-FS415M

Brands by name

Popular brands