127
n
N
Customizing Your VAIO Computer
Adding the Password
To add the password
VGN-A700 Series models
1
Turn on your computer.
2
Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, press the F2 key several times.
3
Use the
<
or
,
key to select Security and press the Enter key.
The password entry screen appears.
4
Enter the password twice and press the Enter key.
The password should be up to 7 alphanumeric characters long.
5
When Password installed appears, press the Enter key.
✍
The following is to configure your computer to prompt password entry when you turn on your computer or display the BIOS setup screen.
6
Select Password when Power ON under Security.
Press the Enter key, use the
M
or
m
key to select Enabled, and then press the Enter key.
7
Use the
<
or
,
key to select Exit and then Exit (Save Changes); and press the Enter key.
On the Save configuration changes and exit setup? screen, confirm that OK is selected and then press the Enter key.
Summary of Contents for VAIO VGN-A700 Series
Page 1: ...N User Guide Personal Computer V G N A 7 0 0 S e r i e s V G N F S 6 0 0 S e r i e s ...
Page 20: ...20 n N Getting Started Back A Air vent B Battery connector page 26 ...
Page 23: ...23 n N Getting Started Bottom A Port replicator connector page 66 B Air vents ...
Page 73: ...73 n N Using Peripheral Devices 6 Slide the lock switch to LOCK 7 Turn on the computer ...
