Sony VAIO VGC-RM Series User Manual Download Page 73

Page: 73 / 162

Using Peripheral Devices

Connecting a Digital Video Camcorder

✍

You need to flip down the left front panel to access the i.LINK port on the front of the access unit.

To connect a digital video camcorder

Plug one end of an i.LINK cable (1) (not supplied) into the i.LINK port (2) on the computer and the other end into the DV In/
Out port (3) on the digital video camcorder.

✍

On Sony digital video cameras, ports labeled DV Out, DV In/Out, or i.LINK are i.LINK-compatible.

The Sony digital video camcorder shown here is an example; your digital video camcorder may need to be connected differently.

You cannot access the pictures stored on a Memory Stick media when using an i.LINK connection.

Summary of Contents for VAIO VGC-RM Series



































































































































































Search results

Summary of Contents for VAIO VGC-RM Series

Reviews:

Related manuals for VAIO VGC-RM Series

Brands by name

Popular brands

Sony VAIO VGC-RM Series, User Manual

Search results

Summary of Contents for VAIO VGC-RM Series

Reviews:

Related manuals for VAIO VGC-RM Series

Brands by name

Popular brands