Sony VAIO VAIO Notebook Computer User Manual Download

Page: 84 / 190

Inserting PC Cards

To insert a PC Card

Make sure the front label of the PC Card is facing up.

Push the PC Card gently into the slot. The system automatically detects the PC Card.

Do not force a PC Card into the slot; this may damage the connector pins.

When a PC Card is inserted, do not place your computer in a bag or case. Pressure or shock to a PC Card may damage
your computer.

Touching the head of the PC Card will not damage the connector pins, but damage may occur if the head of the PC Card
is sticking out of the PC Card slot while the computer is being transported.

Inserting a PC Card

Page 84

Summary of Contents for VAIO VAIO Notebook Computer































































































































































































Search results

Summary of Contents for VAIO VAIO Notebook Computer

Reviews:

Related manuals for VAIO VAIO Notebook Computer

Brands by name

Popular brands

Sony VAIO VAIO Notebook Computer, User Manual

Search results

Summary of Contents for VAIO VAIO Notebook Computer

Reviews:

Related manuals for VAIO VAIO Notebook Computer

Brands by name

Popular brands