Removing, Installing, and Replacing Components
37
Removing a Memory Module
You may need to remove a memory module if you change the memory
configuration or replace a bad module.
1
Remove the left side panel (see
“Removing the Left Side Panel” on
page 22
).
2
Remove the bottom panel (see
“Removing the Bottom Panel”
on
page 23).
3
Remove the front panel (see
“Removing the Front Panel”
on page 24).
4
Slide the diskette drive out approximately two inches (see
“Detaching the Diskette Drive”
on page 39).
5
Remove any add-in cards (see
“Removing an Add-in Card”
on
page 29) and other components as needed to access the memory
modules.
6
Locate the memory module you wish to remove.
!
Before opening the system unit, save any open files, exit Windows, turn off
the power of the computer and all attached peripherals, and then unplug the
power cord.
KY0073.VSD
Summary of Contents for VAIO PCV-E204
