Sony VAIO PCV-E204 Reference Manual Download

Page: 36 / 114

VAIO MicroTower System Reference

Installing an Add-In Card

Remove the slot cover adjacent to the selected slot connector on the
system board (see

“Removing a Slot Cover”

on page 40).

Insert the add-in card into the PCI slot connector. Use a gentle rocking
motion, pressing down until the card is fully seated.

Attach any necessary cables to the card (see the instructions that came
with the add-in card).

Replace the bottom panel (see

“Replacing the Bottom Panel”

page 26).

Replace the left side panel (see

“Replacing the Left Side Panel”

page 27).

Turn on the computer and follow any instructions that came with the
add-in card.

Before opening the system unit, save any open files, exit Windows, turn off

the power of the computer and all attached peripherals, and then unplug the
power cord.

✍

Align the card's bracket so that the bottom of the bracket fits into the slot at the
bottom of the chassis. Assure that the top of the bracket fits snugly against the
chassis lip after the card is fully inserted.

KY0070.VSD

Summary of Contents for VAIO PCV-E204



















































































































Search results

Summary of Contents for VAIO PCV-E204

Reviews:

Related manuals for VAIO PCV-E204

Brands by name

Popular brands

Sony VAIO PCV-E204, Reference Manual

Search results

Summary of Contents for VAIO PCV-E204

Reviews:

Related manuals for VAIO PCV-E204

Brands by name

Popular brands