Sony VAIO PCG-XG28 User Manual Download Page 86

Page: 86 / 130

VAIO® Notebook User Guide

Connecting a Printer to Your Computer

You can connect the printer to your computer using the printer cable and
the supplied floppy disk drive cable to print documents.

Before using the printer

❑

You need to install the software supplied with the printer. See the
manual that came with your printer for more information.

❑

You need to set up the printer’s port. See I cannot print on page 98 for
more information about setting up the printer ports.

To connect a printer

Plug the floppy disk drive cable to the docking/FDD connector on your
computer. Then connect the printer cable (supplied with the printer) to
the PRINTER connector of the floppy disk drive cable.

Printer

Power cord

Printer cable (supplied with the printer)

Floppy disk drive cable

To PRINTER

To docking/FDD

connector

Summary of Contents for VAIO PCG-XG28



































































































































Search results

Summary of Contents for VAIO PCG-XG28

Reviews:

Brands by name

Popular brands

Sony VAIO PCG-XG28, User Manual

Search results

Summary of Contents for VAIO PCG-XG28

Reviews:

Brands by name

Popular brands