Sony VAIO PCG-XG28, User Manual

Page: 63 / 130

Using Infrared Communication Devices
#
✍
Infrared communication capability can be turned on and off. By default, it is disabled when
your system is shipped. To enable infrared use, click the infrared icon in the Windows Control
Panel and select the Enable infrared communication checkbox on the Options tab.
You can disable infrared communication when you are not using it to conserve battery life.
Use the infrared icon in the Windows
Control Panel to enable and disable infrared
communication. Do not use the icon in the taskbar.
Check the Status tag of the Infrared Monitor in the Windows Control Panel to determine if the
infrared device is detected.
If the two devices are too far apart or too close together, data transfer may be interrupted or
there may be noise in the transmission.
Do not cover the infrared ports with your hand or any other object.
Avoid direct sunlight, fluorescent light, or flashing incandescent light near the infrared ports.
See the manual that came with your digital still camera or other infrared communication
device for more information on installation and use.
The active area of infrared transmission extends about 39
3
/
8
inches (1 meter) with an
approximate radius of 15 degrees.
Infrared port
39
3/8
in
ch
es
(1
m)
approximately
15 degrees