background image

Using a microphone to record sound 

You can record messages, memos, etc. by connecting a microphone to the Microphone jack

1

 

on your computer. 

To record from a microphone 

1.

Double-click the 

Volume

 icon 

on the Windows

®

 taskbar. The 

Volume Control

 window appears. 

2.

From the 

Options

 menu, click 

Properties

. The 

Properties 

dialog box appears. 

3.

Click to select the 

Recording

 option in the 

Adjust volume for

 box, and click 

OK

. The 

Recording Control

 window

appears. 

4.

Click the 

Select

 check box at the bottom of the 

Microphone

 column, if it is not already selected. Close the

Recording Control

 window. 

5.

Click 

Start

, and select 

All Programs

Accessories

Entertainment

, and then 

Sound Recorder

. The 

Sound -

Sound Recorder

 window appears. 

  

  For help using Sound Recorder, click 

Help

 in the 

Sound Recorder

 window. 

To adjust the volume for recording sound 

You can only adjust the volume for recording in the

 Recording Control

 window. 

1.

Right-click the 

Volume 

icon

 

on the taskbar, and select 

Adjust Audio Properties

2.

On the 

Audio

 tab, click 

Volume 

in the 

Sound recording

 box. The 

Recording Control

 window appears. 

3.

Click and drag the 

Microphone

 slider up to increase volume and down to decrease volume. 

1

 A  protruding dot loc ated next to the M ic rophone jac k dis tinguis hes  this  jac k from the H eadphone jac k. 

Page 129

Summary of Contents for VAIO PCG-V505BH














































































































































Reviews: