Sony VAIO PCG-R600HMK User Manual Download Page 49

Page: 49 / 120

Sony Notebook

User Guide

Using your notebook

Using Hibernate mode

The state of the system is saved on the hard disk and power is turned off. The power indicator light is off in
this mode.

To activate Hibernate mode, proceed as follows:

Go to the

Start

menu, click

Shut Down...

, and then choose

Hibernate

from the drop-down menu or press

<Fn>

<F12

> keys.

To return to Normal mode, proceed as follows:

Turn on the computer by pressing the power button.
The computer returns to its previous state.

✍

When the computer is in

Hibernate

mode, you cannot insert a disc.

Hibernate

mode requires more time than

Standby

mode to be activated.

It takes more time to return to normal mode from

Hibernate

mode than from

Standby

mode.

Hibernate

mode uses less power than

Standby

mode.

Do not move the notebook until its power indicator turns off.

Summary of Contents for VAIO PCG-R600HMK

























































































































Search results

Summary of Contents for VAIO PCG-R600HMK

Reviews:

Related manuals for VAIO PCG-R600HMK

Brands by name

Popular brands

Sony VAIO PCG-R600HMK, User Manual

Search results

Summary of Contents for VAIO PCG-R600HMK

Reviews:

Related manuals for VAIO PCG-R600HMK

Brands by name

Popular brands