Sony VAIO PCG-R600HFK User Manual Download

Page: 71 / 111

Sony Not

book Us

Connecting peripheral devices

Connecting a printer

You can connect a Windows-compatible printer to your computer to print documents.

Connecting a printer using the USB connector

To connect a printer using the USB connector, proceed as follows

Plug an optional USB printer cable into one of the USB connectors on your computer or your docking
station. A USB connector is identified by the

symbol.

Plug the printer power cord into an AC outlet.

Before using the printer, you may need to change the

Printer

settings in the

Sony Notebook Setup

software.

Turn off your computer and the printer, unplug the AC adapter and the power cord before connecting the printer.

Connecting a printer using the printer connector

The docking station (optional) is equipped with a printer connector.

To connect a printer using the printer connector, proceed as follows:

Plug the printer cable (1) supplied with the printer into the docking station printer connector (2)
identified by the

symbol.

Plug the printer power cord (3) into an AC outlet.

Before using the printer, you may need to change the

Printer

settings in the

Sony Notebook Setup

software.

Summary of Contents for VAIO PCG-R600HFK
















































































































Search results

Summary of Contents for VAIO PCG-R600HFK

Reviews:

Related manuals for VAIO PCG-R600HFK

Brands by name

Popular brands

Sony VAIO PCG-R600HFK, User Manual

Search results

Summary of Contents for VAIO PCG-R600HFK

Reviews:

Related manuals for VAIO PCG-R600HFK

Brands by name

Popular brands