manualshive.com logo in svg

Sony VAIO PCG-GR2515G, User Manual

Share
Download
Sony VAIO PCG-GR2515G User Manual Download Page 94

Sony 

Notebook U

s

er Guide

Getting help

93

n

N

I cannot get SonicStage to detect the MagicGate Memory Stick™. The error message "External Device/Media 
not found" appears

❑

Make sure your Memory Stick™ is inserted into the MagicGate Memory Stick™ slot rather than via the 
PC Card slot.

Can I install the SonicStage software on other (non-Sony) computers? 

❑

You cannot install SonicStage from the application CD onto a non-Sony computer.

✍

If you have any other problems regarding SonicStage, you can check the VAIO-Link website for a SonicStage update: 

http://www.vaio-link.com

.

About the display

My LCD does not display anything

❑

Check that the computer and display are both plugged into a power source and that they are turned on.

❑

Check that the power indicator on the front panel of the computer is on.

❑

Check that the battery packs are inserted properly and that they are charged.

❑

Adjust the brightness of the LCD.

❑

The computer may be in LCD (video) standby mode. Press any key to activate the display.

❑

The display mode may be set to external display mode. Press and hold the 

<Fn>

 key while pressing 

<F7>

 

several times.

The screen image on my external display is not centred or sized properly

Use the controls on your external display to adjust the image.

The window I have just closed continues to appear on my LCD

Press the 

<Windows

®

>

 key and 

<D>

 key twice to refresh the screen.

Summary of Contents for VAIO PCG-GR2515G


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands