Change text in this variable to document title as each document is created.
118
My notebook starts, but a BIOS error is displayed.
❑
When the internal backup battery is low on power, it may not start your
system properly. The message “Press <F1> to resume, <F2> to setup”
appears at the bottom of the screen. Follow these steps:
1
Press F2. The BIOS Setup menu appears.
2
Set the date (month/day/year). Press Enter.
3
Press
to select System Time, then set the time (hour: minute:
second). Press Enter.
4
Press
to select Exit, then press
to select Get Default Values. The
message “Load default configuration now?” appears.
5
Select Yes and press Enter.
6
Select Exit (Save Changes), and then press Enter. The message “Save
Configuration changes and exit now?” appears.
7
Select Yes, and then press Enter. The notebook restarts.
My notebook starts, but the message “Operating system not found” appears
and Windows does not start.
❑
Make sure there is no floppy disk in the floppy disk drive (non-bootable).
❑
If a non-bootable floppy disk is in the drive, follow these steps:
1
Turn off the notebook, and then remove the floppy disk.
2
Restart the notebook and confirm that Windows starts properly.
❑
If Windows still does not start, follow the steps below to initialize the BIOS:
Remove any floppy disk from the floppy disk drive.
3
Turn off the notebook.
4
Remove any peripheral devices connected to the notebook.
5
Turn the notebook back on.
6
Press the F2 key when the Sony logo appears. The BIOS setup menu
screen appears.
7
Press the directional arrow keys to select the Exit menu.
8
Press the arrow keys to select “Get Default Values” and then press Enter.
The message “Load default configuration now?” appears.
Ð
Î
Ð
Summary of Contents for VAIO PCG-FX250
Page 6: ...Change text in this variable to document title as each document is created 6 ...
Page 60: ...Change text in this variable to document title as each document is created 60 ...
Page 100: ...Change text in this variable to document title as each document is created 100 ...
Page 116: ...Change text in this variable to document title as each document is created 116 ...
