Sony VAIO PCG-9562 User Manual Download

Page: 29 / 138

Connecting a Power Source

Insert the battery pack into the battery bay on the left side of the computer.

Close the cover of the battery bay until it clicks.

To charge the battery pack

Connect the AC adapter to the computer.

Insert the battery pack.

The computer automatically charges the battery (the battery indicator light
flashes in a double blink pattern as the battery charges).

When the battery is 85% full, the battery indicator light turns off. This
process takes approximately 3 hours if your notebook’s power is on.

Inserting battery pack

✍

If the port replicator is attached to your computer, do not attempt to insert or remove
the battery pack. Lifting and turning the computer with a port replicator attached could
cause a temporary loss of power.

✍

To charge the battery completely, continue charging for an additional hour. See
“Displaying Battery Information”

Battery pack
(supplied)

Label side facing down

Summary of Contents for VAIO PCG-9562











































































































































Search results

Summary of Contents for VAIO PCG-9562

Reviews:

Related manuals for VAIO PCG-9562

Brands by name

Popular brands

Sony VAIO PCG-9562, User Manual

Search results

Summary of Contents for VAIO PCG-9562

Reviews:

Related manuals for VAIO PCG-9562

Brands by name

Popular brands