Sony VAIO PCG-9562 User Manual Download

Page: 106 / 138

VAIO Notebook User Guide

106

Editing Clips and Scenes

You can edit your movie by adding effects and text, adjusting the color and
contrast, and modifying the length of clips.

Adding effects to a scene or a clip:

Double-click the clip or scene to move it to the Working Panel.

Select the Effects tab from the Editing tray.

Drag and drop the Effect you want to add from the Effects tray to the Effects
palette on the Working Panel.

See help for instructions on adjusting effect duration and replaying clips/
scenes.

Saving a Movie

Verify that the clip(s) you want to save is on the Product tray. See Help for
more details on saving movies.

Click Export.

Working Panel

✍

To preview an Effect, click on the clip in the Working panel monitor. Your clip displays
with the new effect on the Effect tray monitor.

Sound

Color

Speed

Effect Palette

Trim Palette

Monitor

Effect Knobs

Summary of Contents for VAIO PCG-9562











































































































































Search results

Summary of Contents for VAIO PCG-9562

Reviews:

Related manuals for VAIO PCG-9562

Brands by name

Popular brands

Sony VAIO PCG-9562, User Manual

Search results

Summary of Contents for VAIO PCG-9562

Reviews:

Related manuals for VAIO PCG-9562

Brands by name

Popular brands