Sony VAIO Digital Studio PCV-RX790G, User Manual

Page: 36 / 120

VAIO Digital Studio Computer User Guide
36
5 If necessary, edit the list of video clips to be captured.
To delete a clip from the list, click it, and click Delete.
Change the order in which clips are be captured by dragging them up or
down the list.
6 To capture all the video clips on the IN/OUT list, click Capture All.
The Save as a file window appears. This window enables you identify a
location on your hard disk drive where the video clips are be saved. In most
cases, the default location of your D: drive partition is a good choice. You
can also specify how DVgate Motion names your clip files.
7 Click Save. The Batch capturing... window appears, and DVgate Motion
captures your video clips to you hard disk drive.
Editing digital video
DVgate software enables you to combine your captured video clips into a single
movie. Trim the beginning and end of each clip, to include only those scenes you
desire.
1 Click Start, click All Programs, point to DVgate, and click DVgate
Assemble. DVgate Assemble starts.
2 Click Add. The Add dialog box appears.
3 In the Add dialog box, select the video clip files you want to include in your
combined movie, and click Open.
You can select multiple clips by holding down the Ctrl key and clicking
several files.
Your selected clips appear in the Assemble list in the DVgate Assemble
window.
✍
To capture an individual clip, click it in the IN/OUT list window and click Capture.