Sony UWP-D11 Operating Instructions Manual Download | Manualshive

Page: 20 / 38

background image

Tuner Settings

20

• When operating two or more UWP-D series packages

simultaneously with different channel groups, make
sure that they are at least 100 meters (330 feet) apart if
they are used within clear sight of each other (actual
distance may vary depending on the circumstances).

Tuner Settings

Menu structure and operation

Procedure for portable diversity tuner (URX-P03)

There are two menu display modes that can be selected
according to the application.

Simple mode

This mode displays only the required settings for the tuner
and audio output.
You can enable simple mode by setting MENU MODE
(menu display mode) to SIMPLE.

Configuration menus

• GP/CH (group/channel) select
• PHONES (monitor audio) setting
• AUTO SET (auto channel setting) function
• BAND (frequency band) select (Not available on

Japanese and Korean models)

• CLR SCAN (clear channel scan) function
• OUT LEVEL (audio output level) setting
• SYNC (infrared transmitter) function
• TIME (accumulated running time) display
• MENU MODE (menu display mode) setting

Extended mode

This mode displays all configuration menus.
You can enable extended mode by setting MENU MODE
(menu display mode) to ADVANCED.

The existing settings configured in extended mode are
active even when using simple mode.

Configuration menus

• GP/CH (group/channel) select
• PHONES (monitor audio) setting
• AUTO SET (auto channel setting) function
• BAND (frequency band) select (Not available on

Japanese and Korean models)

• CLR SCAN (clear channel scan) function
• OUT LEVEL (audio output level) setting
• SYNC (infrared transmitter) function
• TIME (accumulated running time) display
• MENU MODE (menu display mode) setting
• COMPANDER (compander mode) setting
• POWER SEL (external power selection) setting
• ACT SCAN (active channel scan) function
• PWR LOCK (POWER button lock) function
• BATTERY (battery type) setting
• CONTRAST (display text contrast) setting
• RESET (factory default setting) function
• VERSION (software version) display

Note

«
...
18
19
20
21
22
...
»

Summary of Contents for UWP-D11







































Reviews:

No comments

Related manuals for UWP-D11

Brand: Samson Pages: 8

Brand: Earthworks Audio Pages: 3

Brand: Uniden Pages: 20

Brand: Dickson Pages: 28

Brand: Allison Transmission Pages: 190

Brand: Synco Pages: 2

Brand: CAD Audio Pages: 3

Brand: Speco Pages: 2

Brand: Shure Pages: 35

Brand: Krüger & Matz Pages: 20

Brand: Crowley Tripp Pages: 4

Microphone DM30

Brand: Comfort audio Pages: 74

Brand: Cyber Acoustics Pages: 4

Brand: Samson Pages: 62

Fuller Roadranger

Brand: Eaton Pages: 26

Brand: DMT Pages: 2

Brand: Sennheiser Pages: 2

Brand: Iva Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands