Name and Function of Parts
8
Name and Function of
Parts
Body-pack transmitter (UTX-B03)
a
Antenna
b
POWER indicator
Displays the battery level and charging status.
c
AUDIO (audio input level) indicator
Turns on or off according to the audio input level as
follows.
On (red):
Audio input level is too high. If the sound is
distorted, adjust the attenuation level to decrease the
audio input level
.
On (green):
Audio input level is appropriate.
Off:
There is no audio input or the input level is too low.
Flashing (orange):
Audio is muted (i.e., disabled).
d
Audio input connector (BMP type)
Connect to the supplied lavalier microphone.
• When the audio input level is set to MIC, a voltage for
the lavalier microphone power supply is applied to the
audio input connector. Special electrical wiring is used
inside the audio input connector for this purpose.
• If a lavalier microphone other than the one supplied is
connected, the proper performance may not be
obtained.
e
POWER/MUTING button
Turns the power on/off. You also use this button to turn
the muting function on/off.
f
USB connector (Micro B type)
Connect to a commercially available USB portable power
supply.
When a USB portable power supply is connected while
the power is turned on, the unit automatically operates
with power supplied by the USB portable power supply.
When a USB portable power supply is connected while
nickel metal hydride batteries are inserted and the power
is turned off, the batteries are charged by the USB
portable power supply.
Alkaline batteries and lithium batteries cannot be
recharged.
g
Battery compartment
Accepts two AA batteries (alkaline, nickel metal hydride,
or lithium batteries).
For details on how to insert batteries, see “Power
Supply” (page 14).
h
+ or – button
Selects functions or values shown on the display.
Indicator display Status
On (green)
Sufficient battery level
Flashing (green)
Battery is getting low
On (orange)
Charging (when nickel metal hydride
rechargeable batteries are inserted
and power is turned off)
Flashing (red)
Charging not possible (when batteries
other than rechargeable nickel metal
hydride batteries are inserted or the
nickel metal hydride batteries are
deteriorated)
Disconnect the USB cable, and
replace the batteries.
Off
Power is off or battery is empty
Note
Notes
Function
Operation
Supply ON
Press button for one second or longer
Supply OFF
Press button until the indicator turns
off
Muting ON
Press button
Muting OFF
Note
Summary of Contents for URX-P03
Page 38: ...Sony Corporation ...