21
Making Full-Size Image Printouts
O
p
er
at
io
n
2
Start the video source to display the source image on
the video monitor.
This operation is done using the controls of the video
equipment acting as the source.
3
Press the CAPTURE button at the instant the image
you want to print appears on the screen.
The image is captured into memory. The memory
image is displayed on the screen. Which image
appears after this, the source image or the memory
image, depends on the setting made with the
FUNCTION SETUP facility of the printer. (See
page 30.)
If the captured image is blurred
A quickly moving image may be blurred when
captured. Should this occur, change the memory mode
setting to FIELD, then print it again. Although the
blur should be eliminated, the ultimate print quality
will be slightly degraded.
Select the FIELD mode on the LAYOUT SETUP
menu. (See “Selecting the memory mode” on
page 27.)
Note
Usually, it is recommended that you make printouts in
FRAME mode. (The default setting is FRAME.)
You can confirm the memory mode setting on the
bottom part of the video monitor.
To change the image captured in memory
1
To display the source image when the memory
image is displayed on the screen, press the
SOURCE/MEMORY button.
2
Press the CAPTURE button at the instant the
image you want to print appears.
The previous image is replaced with the new one.
4
Press the PRINT button.
Shows that an image from the source equipment is
currently displayed on the screen.
Shows that an image captured in memory is
displayed on the monitor.
When FRAME mode is selected:
When FIELD mode is selected:
Summary of Contents for UP25MD
Page 76: ...Sony Corporation ...
